Bellinzoni Liquid Wax
Our Bellinzoni Liquid wax specially formulated to intensify and to enhance marble and granite colours giving them an attractive “wet look”. Since the product contains no resins, it will not leave an unattractive film and will not become yellow. It dries quickly and polishes easily. LIQUID PREPARATION is exceptionally useful for corners, edges and areas where mechanical polishing is difficult.
Instruction for use:
Apply evenly the product on the surface to treat (surface must be clean and without powder). Let it dry for 5-10 minutes (in dependence of temperature). To reach a brilliant result is necessary to buff with dry soft cloth, with fine steel wool (00 or 000) or by brush. It is also possible to polish the stone using an electrical machine (max. 2000 rpm) equipped with felt disc or cloth disc.
If the product is applied on the floor, it can be polished using a buffing machine with steel wool or floor polish machine equipped with steel wool disc or polishing disc supplied with the machine.
Suggestion for use and recommendations:
- It is not advised to apply the product on synthetic materials as plastics, linoleum and laminate.
- Apply on clean and dry surfaces.
- Perform a preliminary test on a small area before actual use.
- Read carefully recommendations printed on the label and always perform a preliminary test before use.
- Agglomerated stones.
- Angle grinder
- Single Disc
For polishing of marble and granite polished or grinded above grit 800, with 750 ml of product is possible to treat 20/30 sqm. In case of calcareous stone, limestone, sandstone, concrete polished or grinded above grit 800 with 1 kg of product, it is possible to treat 15/25 sqm.