Bellinzoni Idea XC Water & Oil Repellent (Wet Look)

Bellinzoni Idea XC Water & Oil Repellent (Wet Look)

IDEA XC is an impregnating sealer to protect stones against water, oil, grease and humidity giving an attractive wet-look effect; optimised for polished materials. When applied, IDEA XC penetrates the stone without forming an unsightly plastic film.

IDEA XC will make the stone repel water and oil by penetrating deeply into the stone, protecting it from water and oily substances but allowing the stone to breath while the humidity can evaporate, therefore blocking efflorescence.

Instructions

Instruction for use:

Surface must be clean and dry; stains, mildew, crusting must be scraped off otherwise they will be harder to remove after protection. Application can be done by brush, by roller or by spray gun. It is suggested, when possible, to apply the product by brush because it allows the product to penetrate better into the stone. Application of IDEA XC by brush, making pressure, will facilitate penetration into frames and cavities. Continuously repeat the application, without interruption, until the stone has been saturated (the stone does not absorb further product). During the application and subsequent drying, the temperature of the substrate should be between 10 and 30 ° C. In case of application on floor with underfloor heating system turn off heating and allow the stone to cool completely.

Application tools:

  • Brush
  • Roll
  • Cloth
  • Mop Fleece

Suggestion for use and recommendations:

  • We recommend applying the product until the stone is completely saturatated. Taking care to apply it wet on wet, ie without letting the first coat dry, but continuing the application.
  • Do not dilute the product with water or other solvents because the product is ready for use.
  • The material being treated must be completely dry and clean.
  • Another way of application, suitable for small pieces, can be the complete immersion.
  • Once treated, the stone must be left to dry for 24 hours. Optimal performance is guaranteed after complete polymerization (about 3 days).
  • In the case of treatments for statues, vases or decorative items, pay close attention to cavities.
  • Carefully read recommendations printed on label and perform a preliminary test on a small area before actual use.

Application surfaces:

  • Marble
  • Granite
  • Engineered & Artificial stones.

For very absorbent materials like Limestone and Sandstone we suggest our IDEA RAPID.

Coverage:

For protection of marble and granite polished or grinded after grid 800, with 1 litre of product is possible to treat 15/25 sqm. In case of calcareous stone, limestone, sandstone, concrete, with 1 litre of product it is possible to treat 8/15 sqm.

Maintenance of the treated surface:

For proper maintenance of the treatment we recommend carrying out periodic washing with our LEM-3 neutral detergent, diluted with water according to the amount of dirt to be removed, without using abrasive tools. The treatment has a variable duration, depending on weather condition it is exposed to and wear of the material. If necessary, it is possible to reapply IDEA XC above a previous application

Videos

Downloads

Technical Data Sheet

Safety Data Sheet

ImageCode Description Quantity
Bellinzoni Idea XC Water & Oil Repellent (Wet Look) - Bellinzoni Idea XC 1lt Water & Oil Repellent GB01602-1 Bellinzoni Idea XC 1lt Water & Oil Repellent
-
+

Follow MACTOOL on Social Media!

Find us

Head Office (Cape Town)

Unit 6 Pennisi Park, No.3 Jig Ave, Montague Gardens

Johannesburg

Unit 4 Hughes Industrial Park, Cnr Oscar & Romeo Rd, Hughes

Durban

Unit 1A, 44 Hillclimb Rd, Westmead

GET IN TOUCH

Head Office (Cape Town):

Email: sales@mactool.co.za
Tel: +27 21 552 8566

Johannesburg:

Email: salesjhb@mactool.co.za
Tel: +27 11 823 1077

Durban:

Email: saleskzn@mactool.co.za
Tel: +27 31 350 4004
linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram