Cape Town:+27 21 552 8566 Johannesburg:+27 11 823 1077 Durban:+27 31 350 4004
Mactool -

PRODUCTS

Machines > ICS Chain Saws


ICS 680ES Petrol-Powered Concrete Chain Saw


ICS 680ES Concrete Chain Saw
ICS 680ES Concrete Chain Saw

Model: 680ES Concrete Chain Saw

Manufacturer: ICS


Built to meet the operation and flexibility demands of the general construction user, the 680ES stands alone in terms of reliability and value. Easy to start with a new multifunction lever to control choke, run, and stop functions. The distinctive black powerhead houses specially designed carburetion and ignition systems that work together to ensure easy starting, cooler operation and dependable performance at just about any elevation. Available with 30 cm and 35 cm guidebars and the entire line of MAX series diamond chain.

  • Polyester air filter designed specifically for wet cutting
  • Operates EuroMAX™bar and chain consumables up to 35cm
  • Multifunction lever controls choke, throttle advance, run and stop modes
  • Extended drive sprocket adapter offers easy chain assembly
  • Deep cutting solution for obstructed or small openings
  • Cut squares as small as 10 cm x 10 cm
  • Easy-to-start in all weather

 

Engine Type

2-stroke, Air Cooled

Displacement

76.5 cc (4.7 cu-in)

Horsepower

3.7 kW (5 hp) @ 9,500 rpm

Torque

4.1 Nm (36.3 in-lbs) @ 6,500 rpm

Engine Speed

11500 +/- 500 rpm (max) / 2,800 - 3,200 rpm (Idle)

Chain Speed at Maximum Power

34.5 m/s 

Weight

9.5 kg powerhead only

Dimensions

46 cm length / 29 cm height / 25 cm width

Starter

Dust and water resistant

Ignition

Special water resistant electronic ignition

Fuel ratio

4% (25:1) gasoline-to-oil

Fuel Capacity

0.88 liter (0.23 gallon)

Water Supply Requirement

Minimum: 1.5 bar (20 psi)

Water Flow Requirement

Minimum: 4 lpm (1 gpm)

Guaranteed Sound Power Level, Lwa (1)

117 dB(A) (Kwa=3.0 dB(A))

Equivalent Sound Pressure at the Operator's Ear Lwa

101.0 dB(A) (K = 2.0 dB(A))

Vibration, ahv eq Concrete Cutting (2)

7.2 m/s2 (K=1.0 m/s2) Front Handle / 8.5 m/s2 (K=1.0 m/s2) Rear Handle

1) Measured in accordance with ANSI S12.51-2012/ISO3741:2010 / (2) Measured in accordance with ISO5349=1:2001 and IS 22867:2011

 


Code Description Power Type Add to Enquiries
ICS-680ES ICS 680ES Concrete Chain Saw Petrol-Powered