Cape Town:+27 21 552 8566 Johannesburg:+27 11 823 1077 Durban:+27 31 350 4004
Mactool -

PRODUCTS

Bellinzoni Stone Products > Protective Sealers


Bellinzoni Limeseal Water & Oil Repellent


[CAPTION]

Model: Bellinzoni Limeseal Water & Oil Repellent

Manufacturer: Bellinzoni Italy


Description:

Bellinzoni Limeseal is a colourless impregnating and anti-salts resurfacing product, that also protects the material from water and oil. Bellinzoni LIMESEALER is suited for very porous and friable stones such as limestone and sandstone. Bellinzoni LIMESEALER gives a high protection against penetration of water, humidity and against action of acid rains. It prevents formation of mildews on material exposed to humidity and blocks the resurfacing of salts. Bellinzoni LIMESEALER is in most of cases transparent and does not give a wet or shiny aspect to the treated material.


Instruction for Use:

Surface must be clean and dry. Stains, mildew and crusting must be scraped off otherwise they will be harder to remove after protection. Application can be done by brush, by roller or by spray gun. It is suggested, when possible, to apply the product by brush because it allows the product to penetrate better into the stone. Application of LIMESEALER by brush will facilitate penetration into frames and cavities. Repeat the application continuously without interruption until the stone has been saturated (the stone does not absorb further product).

 

 Suggestion for Use:

  • Material has to be completely dry before treatment.
  • Do not dilute the product with any solvent or water, formulation is ready for use.
  • It is recommended to apply the product until the stone is completely saturated without waiting between applications. Do not let the product dry during application until complete saturation.
  • Once the material has been treated it is necessary to wait 24 hours for complete polymerization.
  • In case of treatment of statues, decorations etc. pay attention to all cavities and corners.
  • Read recommendations printed on the tin before use carefully.
  • Always carry out a test before effective use.

 

Application on surfaces:

Sandstone, Limestone, and all porous and friable materials.

Product Documentation:

Lime Seal Technical.pdf


Code Description Unit Add to Enquiries
GB02001 Bellinzoni Limeseal 1lt Water & Oil Repellent 1LT