Cape Town:+27 21 552 8566 Johannesburg:+27 11 823 1077 Durban:+27 31 350 4004
Mactool -

PRODUCTS

Bellinzoni Stone Products > Protective Sealers


Bellinzoni Idea Dark Water & Oil Repellent


Bellinzoni Idea Dark Water & Oil Repellent
Bellinzoni Idea Dark Water & Oil Repellent

Model: Bellinzoni Idea Dark Water & Oil Repellent

Manufacturer: Bellinzoni Italy


Bellinzoni  IDEA DARK is a protective impregnating agent, for the treatment of both shiny and rough surfaces of natural stones such as granites, marbles, etc. Specific for dark or black absorbing stones, Bellinzoni  IDEA DARK deeply enhances the natural colour of stone, covers scratches and flaws of dark/black stone.




Application on surfaces:

Marble, granite, terrazzo, agglomerated and engineered stones, sandstone, limestone, concrete.

Restoration and enhancement works, on inside and outside stone or masonry surfaces.

Ideal for protecting walls, brick or concrete walls, stone floors (matte or glossy marble or granite).

 

Instruction for Use:

Surface must be clean, dry, without any trace of dirt; stone to be treated must not contain salts (sulfates, chlorides and nitrates) since their presence reduces the absorption. Stains, mildew, crusting must be scraped off otherwise they will be harder to remove after protection. Apply IDEA DARK without any dilution, using a brush, a cloth, by roller or by spray gun. It is suggested, when possible, to apply the product by brush because it allows the product to penetrate well into the stone. In this case, apply IDEA DARK making a gentle pressure on the brush, in order to facilitate penetration into frames and cavities. Apply necessary quantity up to complete absorption. After 10/15 minutes, remove excess of product with an absorbing cloth

 

Suggestion for Use:

  • It is advisable to apply the product until complete saturation of the stone.
  • On very absorbent material it is better to make a second application after one hour.
  • Do not dilute the product with any solvent or water, formulation is ready for use.
  • Material has to be completely dry before treatment.
  • For small pieces of stone it is possible to apply the product by immersion.
  • Once the material has been treated it is necessary to wait 24 hours for complete polymerization.
  • In case of treatment of statues, decorations etc. Pay attention to protect all cavities and corners.
  • Read carefully recommendations printed on the tin before use.

 

 

Coverage:

For protection of marble and granite polished after grit 800. With 1 litre of product it is possible to treat 15/20 m2. In case of calcareous stone, limestone, sand stone, polished or grinded concrete with the same finish, yield could be slightly less. Treatment of absorbing stones, or with a rough finish, could require a higher amount of product, with an indicative coverage of 10 m2 with 1 litre.

 

 

 

Product Documentation:

Idea Dark Technical.pdf


Code Description Unit Add to Enquiries
GB01702 Bellinzoni Idea Dark 1lt Water Repellent 1LT
GB01703 Bellinzoni Idea Dark 5lt Water Repellent 5LT
GB01704 Bellinzoni Idea Dark 25lt Water Repellent 25LT