Cape Town:+27 21 552 8566 Johannesburg:+27 11 823 1077 Durban:+27 31 350 4004
Mactool -

PRODUCTS

Machines > Husqvarna Core Drilling


DMS 160


DMS160A
DMS160A
DMS160AT
DMS160AT

Model: DMS160

Manufacturer: Husqvarna


DMS 160 A is a small but powerful electric drill motor and stand system. An ideal choice for light core drilling applications up to 120 mm diameter. Suitable for stitch drilling and drilling close to walls and edges in applications such as small channels and pipes as well as electrical sockets.



Code Model Number Description Power Add to Enquiries
H965157502 DMS160A 120mm MAX Core Drill / Straight Stand 1550W
H965157504 DMS160AT 120mm MAX Core Drill / Pivot Stand 1550W

DMS 240


[CAPTION]

Model: DMS240

Manufacturer: Husqvarna


DMS 240 is an electric drill motor and stand system for a huge variety of core drilling applications. It is the most powerful system in our drill motor stand range. An ideal system for medium core drilling in walls, floors and roofs up to 250 mm diameter. The stand is easy to tilt, the back support provides reliable and stable angle drilling, saving you setup time and body stress. This system can be used for drilling ventilation and plumbing channels, waste evacuation pipes, barrier and road signs.


For more detailed infomation please visit the Husqvarna DMS240 webpage


Code Model Number Description Power Add to Enquiries
H965173603 DMS240 250mm Max Core Drill/Stand 2400W

DM 220


[CAPTION]

Model: DM 220

Manufacturer: Husqvarna


Handheld electric core drill for both dry and wet drilling. DM 220 has an electronic positioning system for accurate drilling, making it a perfect choice when you look for a drill motor with precision and efficiency. The ergonomically designed D-handle gives you good control whilst drilling. Handheld core drilling up to 80 mm or drilling with stand up to 150 mm. Suitable for light applications such as ventilation, plumbing pipes, electrical sockets and cables. An excellent choice for professionals as well as semi-professionals.


 

Features Husqvarna DM 220

  • Several of our products has the Smart Start® feature which means that by pressing the Smart Start®  button speed is reduced by half, making it easier to start drilling.
  • Adapted to all types of users – from beginners to professionals.
  • Has a new level guiding system that guides the operator, increases precision, and through that, provides more efficient drilling.
  • The machine’s front handle can be turned 360 degree, which is useful when drilling in cramped areas.
  • The electronic positioning system guides the operator to drill in vertical, horizontal or preferred angled position.
  • Equipped with Elgard™, which uses pulsation to indicate when the machine is overloaded. This extends product life.
  • When making a starter hole, speed can be reduced by half using Smart Start®. This function is integrated in the trigger.
  • Built-in SoftStart™– electronic current limiter means full speed is reached about two seconds after start.
     

Drill diameter with stand, max mm = 150

Drill diameter handheld, max mm = 80

 

For more detailed infomation please visit the Husqvarna DM220 webpage

 

 

 

 


Code Model Number Description Power Add to Enquiries
H966563501 DM 220 Handheld Core Drill 1850W
H966827301 DS 250 DS 250 Drill Stand -
H506326302 - 15L Pressurised Water Tank Hand Pump
H502434801 - Anchoring Kit -

DM 280


[CAPTION]
[CAPTION]
[CAPTION]

Model: DM 280

Manufacturer: Husqvarna


The DM 280 features an ergonomic handle that makes it easy to carry around. The controls are designed and positioned to further enhance ergonomics and to facilitate drilling. TheDM280 can be used on all of Husqvarna’s larger drill stands, and for drill bits from 50 to 350mm in diameter. The machine has three gear stages, so you can find the optimal drilling speed.

 

  • The Elgard™ feature available on several of our drill motors facilitates that if the motor runs at too high a load for a long period, it will start to pulsate. If the load is not reduced the motor will shut off, to prevent overheating. Elgard™ significantly increases the machine’s service life.
  • An electronic current limiter for softer starts. Full speed is reached about two seconds after the switch is turned on.
  • This drill motor can be used on all of Husqvarna’s larger drill stands.
  • Equipped with Elgard™ which indicates via the LED when the machine is overloaded. This allows the operator to always drill at maximum pressure and prevents engine damage and extends product life.
  • Pressing the SmartStart button reduces start speed by 50 %.
  • SoftStart™ – electronic current limiter means full speed is reached about two seconds after start.
  • The machine has a designed handle for easier transport and faster set-up.
  • The controls are designed and positioned to enhance ergonomics and facilitate operation.
  • The water hose can turn 180°, for greater flexibility in terms of setup configuration.

 

Please note drill and stand sold separately 

For more detailed infomation please visit the Husqvarna DM280 webpage




Code Model Number Description Power Add to Enquiries
H966554106 DM 280 DM 280 Core Drill 2700w
H966829807 DS 450 DS 450 Drill Stand -
H506326302 - 15L Pressurised Water Tank Hand Pump
H502434801 - Anchoring Kit -
H966666601 AD10 AD10 Automatic Drill System -

DM 340


[CAPTION]
[CAPTION]
[CAPTION]

Model: DM 340

Manufacturer: Husqvarna


An easy to operate drill motor from Husqvarna. The DM 340 features an ergonomic handle that makes it easy to carry around. The controls are designed and positioned to further enhance ergonomics and to facilitate drilling and set up.

The DM 340 is designed for heavy-duty core drilling applications where high production rates are needed, especially with large diameter core bits. The machine has a three-speed gear box, so the operator can find the optimal drilling speed. The LED indicator shows the load of the machine, allowing drilling at maximum pressure, for best performance.

 

 

Features Husqvarna DM 340

  • The LED indicator shows the load of the machine, allowing the operator to always drill at maximum pressure, for best performance.
  • Equipped with Elgard™ which indicates via the LED when the machine is overloaded. This allows the operator to always drill at maximum pressure and prevents engine damage and extends product life.
  • Pressing the SmartStart button reduces start speed by 50 %.
  • SoftStart™ – electronic current limiter means full speed is reached about two seconds after start.
  • Themachine has a designed handle for easier transport and faster set-up.
  • The controls are designed and positioned to enhance ergonomics and facilitate operation.
  • The water hose can turn 180°, for greater flexibility in terms of setup configuration.

 

For more detailed infomation please visit the Husqvarna DM340 webpage



Code Model Number Description Power Add to Enquiries
H965987207 DM 340 DM 340 Core Drill 3300w
H966829807 DS 450 DS 450 Drill Stand -
H506326302 - 15L Pressurised Water Tank Hand Pump
H502434801 - Anchoring Kit -
H966666601 AD10 AD10 Automatic Drill System -

DM 650 High frequency


[CAPTION]
[CAPTION]
[CAPTION]

Model: DM 650

Manufacturer: Husqvarna


Husqvarna DM650 is a very powerful and versatile electric drill motor equipped with high frequency PRIME™ technology. The high power output, low weight, user friendly setup and intelligent design makes Husqvarna DM 650 suitable for most drilling applications. The DM 650 can be used with either PP 65 or PP 220 as power source.

 

Features Husqvarna DM 650

  • Dust-proof, water-cooled motor with minimal service requirements.
  • Torq boost reduces speed to increase drilling torque.
  • The Elgard™ feature available on several of our drill motors facilitates that if the motor runs at too high a load for a long period, it will start to pulsate. If the load is not reduced the motor will shut off, to prevent overheating. Elgard™ significantly increases the machine’s service life.
  • Very powerful drill motor delivering 6 kW on the spindle (3 kW on 1-phase)
  • 18-step adjustable rpm range ensures optimal speed for all drill bit dimensions.
  • Easy to carry and install thanks to low weight and ergonomic design.
  • Dust-proof, water-cooled motor with minimal service requirements.
  • Torq boost, reduces speed to increase drilling torque.
  • Durable, shock-proof design protecting the electronics.
  • Elgard™ enables drilling at maximum pressure without risk of overload.

 

For more detailed infomation please visit the Husqvarna DM650 webpage and Husqvarna PP65 Webpage


 

Power 3-phase: 6.0 kW D 1200 Series
Power 1-phase: 3.0 kW D 1400 Series
Spindle speed unloaded 3-phase: 125-250 rpm
Spindle speed unloaded 1-phase: 270-530 rpm
Spindle thread: 1 1/4"
Drill diameter max: 600 mm
Weight: 14.0 kg

 

 

Code Model Number Description Power Add to Enquiries
H966563601 DM 650 DM 650 High Frequency Core Drill 6kW / 3kW
H966563701 PP 65 HF PP 65 High Frequency Power Pack 7kW / 4kW
H966829807 DS 450 DS 450 Drill Stand -
H506326302 - 15L Pressurised Water Tank Hand Pump
H502434801 - Anchoring Kit -