PRODUCTS

ICS 680ES Petrol-Powered Concrete Chain Saw

Model: 680ES Concrete Chain Saw

Manufacturer: ICS

Built to meet the operation and flexibility demands of the general construction user, the 680ES stands alone in terms of reliability and value. Easy to start with a new multifunction lever to control choke, run, and stop functions. The distinctive black powerhead houses specially designed carburetion and ignition systems that work together to ensure easy starting, cooler operation and dependable performance at just about any elevation. Available with 30 cm and 35 cm guidebars and the entire line of MAX series diamond chain.

• Polyester air filter designed specifically for wet cutting
• Operates EuroMAX™bar and chain consumables up to 35cm
• Multifunction lever controls choke, throttle advance, run and stop modes
• Extended drive sprocket adapter offers easy chain assembly
• Deep cutting solution for obstructed or small openings
• Cut squares as small as 10 cm x 10 cm
• Easy-to-start in all weather

 

Engine Type	2-stroke, Air Cooled
Displacement	76.5 cc (4.7 cu-in)
Horsepower	3.7 kW (5 hp) @ 9,500 rpm
Torque	4.1 Nm (36.3 in-lbs) @ 6,500 rpm
Engine Speed	11500 +/- 500 rpm (max) / 2,800 - 3,200 rpm (Idle)
Chain Speed at Maximum Power	34.5 m/s
Weight	9.5 kg powerhead only
Dimensions	46 cm length / 29 cm height / 25 cm width
Starter	Dust and water resistant
Ignition	Special water resistant electronic ignition
Fuel ratio	4% (25:1) gasoline-to-oil
Fuel Capacity	0.88 liter (0.23 gallon)
Water Supply Requirement	Minimum: 1.5 bar (20 psi)
Water Flow Requirement	Minimum: 4 lpm (1 gpm)
Guaranteed Sound Power Level, Lwa (1)	117 dB(A) (Kwa=3.0 dB(A))
Equivalent Sound Pressure at the Operator's Ear Lwa	101.0 dB(A) (K = 2.0 dB(A))
Vibration, ahv eq Concrete Cutting (2)	7.2 m/s2 (K=1.0 m/s2) Front Handle / 8.5 m/s2 (K=1.0 m/s2) Rear Handle

1) Measured in accordance with ANSI S12.51-2012/ISO3741:2010 / (2) Measured in accordance with ISO5349=1:2001 and IS 22867:2011

 

Code	Description	Power Type	Add to Enquiries
ICS-680ES	ICS 680ES Concrete Chain Saw	Petrol-Powered	Add

ICS 890F4 Hydraulic-Powered Concrete Chain Saw

Model: ICS 890F4 Concrete Chain Saw

Manufacturer: ICS

The ICS 890 Series hydraulic cutting system offers the superior strength of FORCE4® technology. From the redesigned, more durable rear handle, to the easy to replace drive sprocket, this saw is engineered to stand up to your toughest jobs. In a package that exceeds industry standards this sleek powerhouse is packed with features designed to make it work as hard as you do.

• Redesigned rear handle offers improved ergonomic cutting and greater durability
• 3 scratch resistant bubble levels for more accurate vertical and horizontal cutting
• New drive sprocket design allows for quick replacement in the field
• Universal motor across 890 series saw platforms and compatible with ICS 880 series saw
• Available with 30 cm and 2.5 m hoses, 1 cm quick disconnects included for convenience
• New secondary water shut off valve for flow metering and water conservation

8 GPM (30 LPM)

Weight	27.3 lbs (12.4 kg) with 15-inch (38 cm) bar and chain
Bar Length	Up to 25 inches (63 cm)
Motor Speed	6100 rpm
Powerhead Dimensions	23 inches (58.5 cm) length; 10.5 inches (26.5 cm) height; 9.5 inches (24 cm) width
Torque	122 in-lbs
Horsepower	11.5 hp
Hydraulic Supply	8 gpm (30 lpm), 2500 psi (172.5 bar)
Noise Level	107 dB @ 3 ft (1 m)
Vibration Level	2 meters/second; 2 (front handle); 6 meters/second 2 (rear handle)
Water Supply	Minimum 20 psi (1.5 bar)

12 GPM (45 LPM)

Weight	27.3 lbs (12.4 kg) with 15-inch (38 cm) bar/chain and 1’ (.3 m) hose whips)
Bar Length	Up to 25 in (63 cm)
Motor Speed	6500 rpm
Powerhead Dimensions	23 in (58.5 cm) length; 10.5 in (26.5 cm) height; 9.5 in (24 cm) width
Torque	170 in-lbs (19.2 Nm)
Horsepower	17.5 hp (13 kW)
Hydraulic Supply	12 gpm (45 lpm), 2500 psi (172.5 bar)
Noise Level	98 dB @ 3 ft (1 m) (Sound pressure level); 107 dB @ 3ft (1 m) (Sound power level)
Noise Level	2.0 m/second2 (front handle); 6.0 m/second2 (rear handle)
Water Supply	Minimum 20 psi (1.5 bar)

* Product data shown is rated based on maximum input conditions and efficiency assumptions and may vary dependent on power supply.

Code	Description	Power Type	Add to Enquiries
ICS-890F4-30L	ICS 890F4 30lt Concrete Chain Saw	Hydraulic-Powered	Add
ICS-890F4-45L	ICS 890F4 45lt Concrete Chain Saw	Hydraulic-Powered	Add

ICS 890F4 Flush Cut Hydraulic-Powered Concrete Chain Saw

Model: 890F4 Flush Cut

Manufacturer: ICS

The ICS 890 Series hydraulic cutting system offers the superior strength of FORCE4® technology. From the redesigned, more durable rear handle, to the easy to replace drive sprocket, this saw is engineered to stand up to your toughest jobs. In a package that exceeds industry standards this sleek powerhouse is packed with features designed to make it work as hard as you do.

• Cuts within 4 mm of wall
• Redesigned rear handle offers improved ergonomic cutting and greater durability
• 3 scratch resistant bubble levels for more accurate vertical and horizontal cutting
• New drive sprocket design allows for quick replacement in the field
• Universal motor across 890 series saw platforms and compatible with ICS 880 series saw
• Available with 30 cm and 2.5 m hoses, 1 cm quick disconnects included for convenience
• New secondary water shut off valve for flow metering and water conservation

 

8 GPM (30 LPM)

Weight	27.3 lbs (12.4 kg) with 15-inch (38 cm) bar and chain
Bar Length	Up to 25 inches (63 cm)
Motor Speed	6100 rpm
Powerhead Dimensions	23 inches (58.5 cm) length; 10.5 inches (26.5 cm) height; 9.5 inches (24 cm) width
Torque	122 in-lbs
Horesepower	11.5 hp
Hydraulic Supply	8 gpm (30 lpm), 2500 psi (172.5 bar)
Noise Level	107 dB @ 3 ft (1 m)
Vibration Level	2 meters/second2 (front handle); 6 meters/second 2 (rear handle)
Water Supply	Minimum 20 psi (1.5 bar)

12 GPM (45 LPM)

Weight	27.3 lbs (12.4 kg) with 15-inch (38 cm) bar/chain and 1’ (.3 m) hose whips
Bar Length	Up to 25 in (63 cm)
Motor Speed	6500 rpm
Powerhead Dimensions	23 in (58.5 cm) length; 10.5 in (26.5 cm) height; 9.5 in (24 cm) width
Torque	170 in-lbs (19.2 Nm)
Horesepower	17.5 hp (13 kW)
Hydraulic Supply	12 gpm (45 lpm), 2500 psi (172.5 bar)
Noise Level	98 dB @ 3 ft (1 m) (Sound pressure level); 107 dB @ 3ft (1 m) (Sound power level)
Vibration Level	2.0 m/second2 (front handle); 6.0 m/second2 (rear handle)
Water Supply	Minimum 20 psi (1.5 bar)

* Product data shown is rated based on maximum input conditions and efficiency assumptions and may vary dependent on power supply.

Code	Description	Power Type	Add to Enquiries
ICS566352	ICS 890F4 Flush Cut 30LT Concrete Chain Saw	Hydraulic-Powered	Add
ICS890F4-45L	ICS 890F4 Flush Cut 45LT Concrete Chain Saw	Hydraulic-Powered	Add

ICS 814PRO Hydraulic-Powered Concrete Chain Saw

Model: ICS 814PRO Concrete Chain Saw

Manufacturer: ICS

It may be small, but with as much power as its big brother the 890 Series, the 814PRO is ready for the big jobs. Lighter than other hydraulic saws with the ability to cut perfectly square openings as small as 9 cm, the 814PRO is a natural for utility work and other applications where a mix of portability and power are required.

• Lightweight
• Fits into small spaces
• Same power as the 890 Series saws

Weight	6.8 kg with 32 cm bar and chain
Bar Length	32 cm
Motor Speed	8800 rpm
Chain Speed	4400 fpm (25 m/s), free running
Powerhead Dimensions	36.3 cm length 28.7 cm height 23.4 cm width
Torque	84 in-lbs
Horesepower	11.5 hp
Hydraulic Supply	8 gpm (30 lpm), 2500 psi (172.5 bar)
Noise Level	88 dB @ 1 m
Vibration Level	3.5 meters/second2 (front handle)
Water Supply	Minimum 20 psi (1.5 bar)

Code	Description	Power Type	Add to Enquiries
ICS-814PRO	ICS 814PRO Concrete Chain Saw	Hydraulic-Powered	Add