Cape Town:+27 21 552 8566 Johannesburg:+27 11 823 1077 Durban:+27 31 350 4004
Mactool -

PRODUCTS

Bellinzoni Stone Products > Bellinzoni Adhesives


Bellinzoni MASTIC 2000 Glue Solid


Bellinzoni MASTIC 2000
Bellinzoni MASTIC 2000

Model: Bellinzoni MASTIC 2000

Manufacturer: Bellinzoni Italy


Bellinzoni MASTIC 2000 is made with polyester resin in two parts, adhesive and catalyst. Ideal for bonding and filling marble, granite, travertine and natural stones. In the latest formula the use of solvent has been reduced. A special resin has been introduced to increase the adhesive power, making application and polishing easier. Bellinzoni MASTIC 2000 is available both in liquid and solid form for vertical use. 


 

Instructions for use:

The area to be glued or filled must be clean, perfectly dry and dust free. Add 2% of hardener in weight to the mastic, mix thoroughly until a homogeneous mass is obtained and apply with a spatula on horizontal or vertical surface. In cold season it is possible to increase quantity of hardener up to 3%. Once hardened after a couple hours, the mastic can be grinded and polished. For materials with porosities or very big holes (i.e. Travertine) we suggest a second coating.

 

Suggestions of use:

  • Do not use the hardener more than 4% as it will reduce adhesion n of the product and also reduces the working time and could cause colour variation
  • Never catalyse the total quantity of glue (mastic) at one time in order to avoid “mass effect” because the mastic will dry quickly
  • Do not use less than 1% hardener and/or at low temperatures (Below 5⁰ C) as it makes the catalyzation time very long.
  • Do not use colouring paste in quantity more than 2% as it could prejudice the adhesion.
  • After mixing with hardener, the product has a working time between 3 and 15 minutes.
  • Stone can be moved 20 minutes after treatment
  • Read recommendation printed on the tin before use carefully.

 

Applications on surfaces:

Marble, granite, terrazzo, agglomerated and engineered stones, sandstone, limestone, resin marble and concrete.

Product Documentation:

Mastic 2000 Technical.pdf


Code Description Unit Add to Enquiries
GB02802 Bellinzoni MASTIC 2000 Glue Straw Yellow Solid 1lt with hardener 1lt
GB02803 Bellinzoni MASTIC 2000 Glue Straw Yellow Solid 5lt with hardener 5lt
GB02804 Bellinzoni MASTIC 2000 Glue Straw Yellow Solid 17lt with hardener 17lt
GB02902 Bellinzoni MASTIC 2000 Glue White Solid 1lt with hardener 1lt
GB02903 Bellinzoni MASTIC 2000 Glue White Solid 5lt with hardener 5lt
GB02904 Bellinzoni MASTIC 2000 Glue White Solid 17lt with hardener 17lt
GB03102 Bellinzoni MASTIC 2000 Glue Transparent Solid 1lt with hardener 1lt
GB03103 Bellinzoni MASTIC 2000 Glue Transparent Solid 5lt with hardener 5lt
GB03104 Bellinzoni MASTIC 2000 Glue Transparent Solid 17lt with hardener 17lt

Bellinzoni Imprepox1000 Premium Extra Fluid Epox


Bellinzoni Imprepox1000
Bellinzoni Imprepox1000

Manufacturer: Bellinzoni Italy


Bellinzoni IMPREPOX 1000 is a two component epoxy system used mainly in the stone processing field, to restore and consolidate natural stone surfaces, porous and leaky concrete and cement objects, and to reinforce rear of natural stone slabs subject to breakage.

Bellinzoni IMPREPOX1000 is a thermo-hardening, very low viscosity resin based product that reticulates with epoxy specific hardener at room temperature, to be used as hard protective coating chemically resistant in civil engineering, with high solid content, extra transparent and without VOC (Volatile organic compounds).

Bellinzoni IMPREPOX1000 is particularly suitable for the closing of capillaries and micro cracks, it offers hardness and flexibility, best resistance to chemicals and solvents, and it gives particular adhesion and shining after polishing. It is completely transparent and does not turn in yellow. Its renewed formula makes it the best product to fill and seal imperfections on clear marbles and granites.

Highlights:

  • Quick hardening
  • Excellent penetrating power
  • Reduced tendency to yellowing
  • Weatherproof
  • Improves strength of stone
  • Excellent polishing
  • VOC Content: 0

 

 

Instruction for Use:

Surface to be treated must be clean and dry. Stains, mildew and crusting must be scraped off.

Catalysis ratio is 4:1. Four parts of component “A” and one part of component “B”.

Mix two component into a clean tin, pour the content on the stone to be treated and spread with a spatula or notched trowel on the entire slab if necessary, to fill capillaries and cracks. Apply only on the crack if is necessary to fill only that part of the stone. Take from the original tins (part A & Part B) only small quantities of product to avoid a very fast reaction.

The mix has a workable time of 20/30 minutes at 20°C, the time will be longer at lower room temperature and shorter at higher room temperature. Grinding can be done after 24 hours at room temperature (20°C), or it is possible to warm the slab to higher temperature in order to shorten drying time:

20°C

24 hours

30°C

12 hours

40°C

6 hours

50°C

4 hours

60°C

3 hours

 

Complete polymerization of Bellinzoni IMPREPOX 1000 will be after 7-8 days from application. Grinding and polishing can be done using regular abrasive stones or diamond tools.

 

Suggestion for Use:

  • Avoid using Imprepox1000 at temperature below 15°C because drying process might not be completed.
  • Epoxy resins are sensitive to humidity and could change reaction times, it is advised not to apply the product in situation of high humidity.
  • Never catalyse the total quantity of the mastic at one time in order to avoid “mass effect” because the mastic will dry quickly.
  • Do not use hardener in different ratio than indicated on the tin or in the present bulletin; it will prejudice catalysis time and could never dry, or change the colour of catalysed product.
  • Do not use the colouring paste in quantity more than 5% as it could prejudice the adhesion.
  • Part A and Part B should be taken with different paddles/spatulas.
  • Adhesive already thickened or in gel phase could no longer be worked.
  • Tools can be cleaned with nitro solvent.
  • Keep lid closed and store product in a cool and ventilated place
  • Avoid contaminating part A with part B.
  • Read recommendations printed on the tin before use carefully.

 

Application on surfaces:

Marble, granite, terrazzo, engineered stones, sandstone, limestone and concrete.

Treated surfaces may deepen in colour to a greater or lesser amount depending upon the type of stone.

Fissured areas can look more enhanced than the rest of surface.

Hardening process is accelerated by heat and delayed by cold.

 

Coverage:

For treatment of marble and granite with hairline cracks or micro cracks, it is possible to treat approximately 15-20m2 with 1 Kg of product (mix).

Product Documentation:

Improx 1000 Technical.pdf


Code Description Unit Add to Enquiries
GB04501 Bellinzoni Imprepox1000 Premium Extra Fluid Epoxy A 1kg 1kg
GB4502 Bellinzoni Imprepox1000 Premium Extra Fluid Epoxy B 250g 250g