Cape Town:+27 21 552 8566 Johannesburg:+27 11 823 1077 Durban:+27 31 350 4004
Mactool -

PRODUCTS

Scanmaskin Floor Grinding > Machines


Scanmaskin Helicopter


[CAPTION]

Manufacturer: Scanmaskin


An electric trowel machine to trowel resin-based floor coatings with natural or coloured quartz sand.


Blade Options

We have different blades for different applications for both the electric power trowel and the battery power trowel.

Grey Plastic
: made to be used on floor where you scatter the sand into the surface of slurry and then trowel the surface to a smooth and nice surface.

Compact Blades: (made in steel), made to be used on floor where you scatter the sand into the surface of slurry and then trowel the surface to a smooth and nice surface. Steel blades are faster than plastic, but the noise from the blades is higher and there is a risk that you will get thin “trowel-roses” in the surface when the floor is ready.

White Flex made to be used on when you mix the sand and epoxy to a mortal and bring the coating on the floor with a screedbox. Works also very well on scatter-system if you put a compact blade in steel behind each White flex.

STD-blades made to be used on when you mix the sand and epoxy to a mortal and bring the coating on the floor with a screed box.

Natural Stone Blades made to be used on “stone carpet floors”, floors with stones in the size of 2-3 mm, 3-4 mm and 4-6 mm.


 

 

 

Technical Data

Motor power: 0,2 kW

Voltage: 1 x 230 V

Speed: 0- 170/min

Weight: 14 kg

Working width: 475 mm

 

Included with machine:

  • Machine,
  • control handle,
  • 1 trowel disc (diameter 500 mm)
  • 20 trowel blades (installed)

removal and attachment key for trowel disc


Code Description Phase Motor Current Weight Add to Enquiries
SCM-220000 Electric Power Trowel Machine Single 0.2 kW - 14kg

Scanmaskin 18


[CAPTION]
[CAPTION]
[CAPTION]

Model: 18

Manufacturer: Scanmaskin


The Scanmaskin 18 is a versatile grinder for both aggressive and fine grinding of concrete surfaces. Along with grinding concrete and natural stone and dry-polishing concrete and terrazzo, the Scanmaskin 18 is great for removing lighter coatings. The Scanmaskin 18 can also be used for sanding and re-finishing hardwood floors. With the wide range of available tooling options, the Scanmaskin 18 can be used for virtually any application out there.

The Scanmaskin 18 is the perfect machine for the rental market and smaller renovating businesses. It is flexible and easy to use. The Scanmaskin 18 is the first machine in a new generation of floor grinders, which combines a small footprint with high productivity. It is the perfect machine for light coatings removal and building remodel applications.

The Scanmaskin 18 is extremely easy to operate in residential and small commercial applications.

Although the Scanmaskin 18 weighs only 100 kg, it is built very robust with solid steel construction. Our patented spring-steel flex head system reduces vibration and allows the machine to grind rough surfaces with minimal effort.

The Scanmaskin 18 can easily be separated into two different modules for easy and convenient transportation, and makes it an extremely attractive option for limited space requirements.



Technical Data:

Motor power: 2,2 kW (3 hP)

Voltage: 1 x 230 V

Current: 12 Amp

Frequency: 50 Hz

Speed: 300-1100/min

Grinding discs: 3 x 150 mm

Grinding width: 450 mm

Weight: 100 kg, grinding unit: 70 kg, handle: 30 kg

 

We recommend the dust collector Scan Dust 2900 for dust free sanding

 

 

Product Documentation:

Scanmaskin 18.pdf


Code Description Phase Motor Current Weight Add to Enquiries
SCM-524518 450mm Planetary Head - Variable Speed Single 2.2kw (3HP) 10 Amp 100kg

Scan Combiflex 330


[CAPTION]
[CAPTION]
[CAPTION]

Model: 330 Edge Grinder

Manufacturer: Scanmaskin


The Scan Combiflex 330 (SC 330) is two machines in one. The SC 330 features a single 330 mm grinding disc that works great for grinding small areas, removing tough coatings, and general surface preparation. The SC 330 can also be configured as a single disc edger by adjusting the axel in two different directions. This unique system allows the SC 330 to be angled towards the edge, which results in extremely clean and effective grinds along edges. This makes the SC 330 one of the best options for grinding and polishing edges, since it eliminates the need for hand held grinders.

The 330 mm disc on the SC 330 can be configured with 3, 6, or 9 of our metal or resin bond diamond tools. This allows the machine to cut more aggressively when necessary (3 tool configuration), or grind soft surfaces by spreading out the weight and using more tooling (9 tool configuration). Sandpaper and our ScanPad maintenance pads can also be used with the SC 330, making it one of the most versatile machines on the market. The SC 330 can easily be separated into two different modules for easy and convenient transportation, and makes it an extremely attractive option for limited space requirements


 

Technical Data

Motor power: 1,5 kW / 4 kW (2 hP)

Voltage: 1 x 230V /  3 x 400 V

Current: 12 Amp / 16 Amp

Frequency: 50Hz

Speed: 600/min / 250-750/min

Grinding disc: 1 x 330 mm

Grinding width: 330 mm

Weight: 65 kg

We recommend the dust collector Scan Dust 2900

for dust free grinding.

Product Documentation:

Scan Combiflex 330.pdf


Code Description Phase Motor Current Weight Add to Enquiries
SCM-51600 Single Speed Single 1.5kW 10 Amp 65Kg
SCM-516055 Single Speed Three 4kW 10 Amp 70Kg
SCM-516500 Variable Speed Single 1.5kW 10 Amp 70Kg

Scan Combiflex 450


[CAPTION]
[CAPTION]

Model: SC-450

Manufacturer: Scanmaskin


The Scan Combiflex 450 (SC 450) is a versatile grinder for both aggressive and fine grinding of
concrete surfaces. Along with grinding concrete and natural stone and dry-polishing concrete and
terrazzo, the SC 450 is great for removing lighter coatings. The SC 450 can also be used for sanding
and re-finishing hardwood floors. With the wide range of available tooling options, the SC 450 can be
used for virtually any application out there.
The SC 450 is the perfect machine for the rental market and smaller renovating businesses. It is
flexible and easy to use. The SC 450 is the first machine in a new generation of floor grinders, which
combines a small footprint with high productivity. It is the perfect machine for light coatings removal
and building remodel applications.
The SC 450 is extremely easy to operate in residential and small commercial applications.
Although the SC 450 weighs only 90 kg, it is built very robust with solid steel construction. Our
patented spring-steel flex head system reduces vibration and allows the machine to grind rough
surfaces with minimal effort.
The SC 450 can easily be separated into two different modules for easy and convenient
transportation, and makes it an extremely attractive option for limited space requirements.


 

Technical Data:
Motor power: 1,5 kW (2 hP)
Voltage: 1 x 230 V
Current: 10 Amp
Frequency: 60 Hz
Speed: 950/min
Grinding discs: 3 x 150 mm
Grinding width: 450 mm
Weight: 90 kg
We recommend the dust collector Scan Dust 2900 for dust free grinding


Code Description Phase Motor Current Weight Add to Enquiries
SCM-524500 450mm Planetary Head - Single Speed Single 1.5kW 10 Amp 95kg

Scan Combiflex 450NS


[CAPTION]
[CAPTION]

Model: SC-450NS

Manufacturer: Scanmaskin


The Scan Combiflex 450NS (SC450NS) is the first machine in a new generation of floor grinders, which combines a small footprint with high productivity. It is the perfect machine for the rental market and smaller renovating businesses. Along with grinding concrete and natural stone, the SC450NS is also perfect for building remodel applications and coatings removal, including paint, carpet residues and lighter coatings. With the wide range of available tooling options, the SC450NS can be used for virtually any application out there.
The SC 450NS is extremely easy to operate in residential and small commercial applications. The SC 450NS also features variable speed, which is crucial for certain grinding and polishing applications along with coating removal. Although the SC 450NS weighs only 125 kg, it is built very robust with solid steel construction. Our patented spring-steel flex head system reduces vibration and allows the machine to grind rough surfaces with minimal effort.
In addition, the SC 450NS comes standard with a built-in water tank for wet grinding, which eliminates the need for an external water source.


 

Technical Data
Motor power: 2,2 kW (3 hP)
Voltage: 1 x 230 V
Current: 12 Amp
Frequency: 50 Hz
Speed: 500-1050/min
Grinding discs: 3 x 150 mm
Grinding width: 450 mm
Weight: 125 kg
Water tank: 18 liters


Code Description Phase Motor Current Weight Add to Enquiries
SCM-524502 450mm Planetary Head - Variable Speed Single 2.2kw (3HP) 12 Amp 125kg

Scan Combiflex 500i


[CAPTION]
[CAPTION]

Model: SC-500i

Manufacturer: Scanmaskin


The Scan Combiflex 500i (SC 500i) is a very effective and powerful machine for grinding concrete surfaces, but really shines in paint and coating removal applications. The midsize 500mm grinding footprint enables very aggressive grinding, which is perfect for removing tough coatings and overlays. The SC 500i is very reliable and has minimal maintenance, resulting in a very low operating cost. With the wide variety of tooling options, the SC 500i is extremely versatile in its different applications.

The SC 500i is a robust and stable machine that uses a patented planetary system to drive its three heads. This patented system uses a double-sided cog belt combined with a gear ring to create a counter-rotating planetary that is extremely durable and easy to maintain. This allows the machine to grind at high disc speeds and heavier head pressure, which results in increased productivity. The SC 500i features 100% steel construction, along with our patented flex head system for reduced vibration and smooth operation on rough surfaces.



Technical Data

Motor power: 2,2 kW (3 hP)

Voltage: 1 x 230 V

Current: 12 Amp

Frequency: 50 Hz

Speed: 500-1050/min

Grinding discs: 3 x 150 mm

Grinding width: 450 mm

Weight: 125 kg

Water tank: 18 liters


Code Description Phase Motor Current Weight Add to Enquiries
SCM-530000 500mm Planetary Head - Single Speed Three 4.0kw 16 Amp 160kg

Scan Combiflex 500PD


[CAPTION]
[CAPTION]

Model: SC-500PD

Manufacturer: Scanmaskin


The Scan Combiflex 500PD (SC 500PD) is the ideal grinding machine for professional grinding and polishing applications. It’s extremely versatile in its different applications. It’s the optimal machine for grinding and polishing concrete, terrazzo, and different types of natural stone. The machine is also very effective when it comes to removal work and floor preparation. It really shines in paint and coating removal applications. The midsize 500 mm grinding footprint enables very aggressive grinding, which is perfect for removing tough coatings and overlays.

The SC 500PD uses a patented planetary system to drive its three heads. This patented system uses a double-sided cog belt combined with a gear ring to create a counter-rotating planetary that is extremely durable and easy to maintain. This allows the machine to grind at high disc speeds and heavier head pressure, which results in increased productivity. The SC 500PD is a robust and stable machine that features 100% steel construction, along with our patented flex head system for reduced vibration and smooth operation on rough surfaces. The SC 500PD is very reliable and has minimal maintenance, resulting in a very low operating cost.

In addition, the SC 500PD comes standard with a built-in water tank for wet grinding, which eliminates the need for an external water source.


 

Technical Data

Motor power: 4 kW (5,5 hP)

Voltage: 3 x 400 V / 1 x 230 V

Current: 16 Amp

Frequency: 50 Hz

Speed: 500-1000/min

Grinding discs: 3 x 150 mm

Grinding width: 500 mm

Weight: 170 kg

Water tank: 18 liters

We recommend the dust collector Scan Dust 2900 for dust free grinding.


Code Description Phase Motor Current Weight Add to Enquiries
SCM-530500 500mm Planetary Head - Variable Speed Three 4.0kw 5.5hP 16 Amp 170kg
SCM-530501 500mm Planetary Head - Variable Speed Single 4.0kw 5.5hP 16 Amp 170kg

Scan Combiflex 650


[CAPTION]
[CAPTION]

Model: SC-650

Manufacturer: Scanmaskin


The Scan Combiflex 650 (SC 650) is a robust and stable machine made of steel, designed for commercial projects. The SC 650 uses a patented planetary system to drive its three heads. This patented system uses a double-sided cog belt combined with a gear ring to create a counter rotating planetary that is extremely durable and easy to maintain. The counter-rotating design also reduces operator fatigue and allows the machine to be operated with minimal effort.

The SC 650 features a grinding width of 650 mm, and is perfect for both residential and commercial applications.

The SC 650 also has two different options for wet grinding. It features a water valve inlet, which comes standard and allows the operator to connect a water hose as the main water supply. As an optional feature, the SC 650 can be purchased with a built-in water tank, which eliminates the need for an external water hose. This is very beneficial in a situation where no running water is available, yet grinding wet is necessary.


 

Technical Data

Motor power: 7,5 kW

Voltage: 3 x 400 V

Current: 16 Amp

Frequency: 50 Hz

Speed: 500-1100/min

Grinding discs: 3 x 210 mm

Grinding width: 650 mm

Weight: 320 kg

Water valve inlet: Standard

Water tank: Optimal feature


We recommend the dust collector Scan Dust 6000 together with the dust separator Scan Dust Separator 6000 for dust free grinding.


Code Description Phase Motor Current Weight Add to Enquiries
SCM-560002 650mm Planetary Head - Variable Speed Three 7.5kw 16 Amp 320kg

Scan Combiflex 700 Remote Control


[CAPTION]
[CAPTION]

Model: SC-700RC

Manufacturer: Scanmaskin


The Scan Combiflex 700RC (SC 700RC) is a robust and stable machine made of steel, designed for high productivity in both small and large areas. The 700 mm grinding footprint is perfect for commercial applications where compact size is important. The SC 700RC has three grinding heads, which spin in a counter-rotating configuration for increased efficiency and smooth operation. This allows the machine to grind or polish at higher speeds, while at the same time minimizing side torque. The truly unique feature of the SC 700RC is the Bluetooth radio control system it uses for controlling motion and grinding speed. The rugged, heavy-duty remote control unit allows the operator to move the machine in any direction, and manoeuvre with precision in tight areas. The ergonomic radio control system is beneficial since it reduces operator fatigue while maintaining a high level of consistency at the same time.

The SC 700RC also has a battery backup system built in to the machine. Thanks to the battery-powered transportation wheels, the machine can easily be loaded and unloaded with minimum effort.

The SC 700RC has two different options for wet grinding. It features a water valve inlet, which comes standard and allows the operator to connect a water hose as the main water supply. As an optional feature, the SC 700RC can be purchased with a built-in water tank, which eliminates the need for an external water hose


Technical Data

Motor power: 7,5 kW

Voltage: 3 x 400 V

Current: 16 Amp

Frequency: 50 Hz

Speed: 300-900/min

Grinding discs: 3 x 240 mm

Grinding width: 700 mm

Weight: 460 kg

Water valve inlet: Standard

Water tank: Optimal feature

Radio controlled: Standard

Radio frequency: 2,4 GHz (Bluetooth)

Batteries, remote control: NiHM

Battery backup for transport: Standard

 

We recommend the dust collector Scan

Dust 6000 together with the dust separator Scan Dust Separator 6000 for dust free grinding


Code Description Phase Motor Current Weight Add to Enquiries
SCM-570000 700mm Planetary Head - Variable Speed Remote Control Three 7.5kw 16 Amp 460kg

Scan Combiflex 800


[CAPTION]
[CAPTION]

Model: SC-800

Manufacturer: Scanmaskin


The Scan Combiflex 800 (SC 800) is a robust and stable machine made of steel, designed for high productivity in large areas. The SC 800 offers 800 mm of grinding power combined with 380 kg of weight, making it the perfect machine for commercial applications. The SC 800 has three grinding heads, which spin in a counter-rotating configuration for increased efficiency and smooth operation. This allows the machine to grind or polish at higher speeds, while at the same time minimizing side torque and stress on the operator. The ergonomic design also reduces vibrations for the operator, and enables the machine to produce consistent results with minimal effort.

The SC 800 also uses a very high disc to drum ratio, which results in each grinding head turning at a very rapid speed. This allows the SC 800 to polish extremely well, and increases the performance of each grinding head.

Additionally, the SC 800 has two different options for wet grinding. It features a water valve inlet, which comes standard and allows the operator to connect a water hose as the main water supply. As an optional feature, the SC 800 can be purchased with a built-in water tank, which eliminates the need for an external water hose.


 

Technical Data:

Motor power: 11 kW (15 hP) ; Current: 32 Amp ; Voltage: 3 x 400 V 50 Hz

Speed: 500-1400/min ; Grinding discs: 3 x 240 mm

Grinding width: 800 mm

Weight: 380 kg

Water valve inlet: Standard

Water tank: Optimal feature

We recommend the dust collector Scan Dust 6000 together with the dust separator Scan Dust Separator 6000 for dust free grinding.


Code Description Phase Motor Current Weight Add to Enquiries
SCM-581000 800mm Planetary Head - Variable Speed Three 11kW 25Amp 400kg

Scan Combiflex 800 Propane


[CAPTION]
[CAPTION]
[CAPTION]

Model: SC-8 Propane

Manufacturer: Scanmaskin


The Scan Combiflex 800 Propane (SC 800 Propane) is a robust and stable machine, designed to be operated 100% from propane, with no need for external electrical power. The SC 800 Propane is great for outdoor applications where there are limited power options. With its weight and horsepower, the SC 800 Propane is a powerful and efficient machine, engineered for any application out there.

The ergonomic design allows the machine to grind and polish at higher speeds, while at the same time minimizing side torque and stress on the operator. The ergonomic design also reduces vibrations for the operator, and enables the machine to produce consistent results with minimal effort.


 

Technical Data:

Motor power: 25 hP / 18,5 kW
Speed: 550-960 / min
Grinding discs: 3 x 240 mm

Grinding width: 800 mm
Weight: 440 kg

Propane tank: 9 kg

Water valve inlet: Standard


Code Description Phase Motor Current Weight Add to Enquiries
SCM-581010 800mm Planetary Head - Variable Speed Propane 25hp / 18.4kW n/a 440kg

Scan Combiflex 1000 Remote Control


[CAPTION]
[CAPTION]

Model: SC-1000RC

Manufacturer: Scanmaskin


The Scan Combiflex 1000RC (SC 1000RC) is the largest model in our line of grinding machines. It is a robust and very stable machine, made entirely of steel and designed for commercial applications. The 1000 mm grinding footprint is perfect for large commercial applications where high productivity is necessary.

The SC 1000RC has six grinding discs, which rotate on a large drum that turns in the opposite direction. With the unique positions of the six grinding heads, it’s also possible to operate the machine in a four-disc configuration. This allows the machine to grind with increased head pressure, and is very useful for certain applications.

One main benefit of the SC 1000RC is the Bluetooth radio control system it uses for controlling motion and grinding speed. The rugged, heavy-duty remote control unit allows the operator to move the machine in any direction, and manoeuvre with precision in tight areas. The ergonomic radio control system is beneficial since it reduces operator fatigue while maintaining a high level of consistency at the same time.

The SC 1000RC also has a battery backup built in to the machine. Thanks to the battery-powered transportation wheels, the machine can easily be loaded and unloaded with minimum effort.

Additionally, the SC 1000RC has two different options for wet grinding. It features a water valve inlet, which comes standard and allows the operator to connect a water hose as the main water supply. As an optional feature, the SC 1000RC can be purchased with a built-in water tank, which eliminates the need for an external water hose


 

 

 


Technical Data

Motor power: 15 kW (30 hP)

Voltage: 3 x 400 V

Current: 32 Amp

Frequency: 50 Hz / 60 Hz

Speed: 300-950/min

Grinding discs: 6 x 240 mm

Grinding width: 1000 mm

Weight: 700 kg

Radio controlled: Standard, 24 V

Radio frequency: 2,4 GHz (Bluetooth)

Batteries, remote control: NiHM

Water valve inlet: Standard

Water tank: Optimal feature

 

We recommend the dust collector Scan Dust 6000 together with the dust separator Scan Dust Separator 6000 for dust free grinding.


Code Description Phase Motor Current Weight Add to Enquiries
SCM-583000 1000mm Planetary Head - Variable Speed Remote Control Three 15kW 32 Amp 700kg